Home Page     Main Shopping Page     View Cart     Shipping Info     Contact Us

Toll free: ( USA/Canada) - 1.888.798.3496   Hours: M-F 10AM - 4PM   Eastern USA Time.
We ship U.S.P.S. Mail - within 24 Hours of receiving your order - M-F.


Item quantities may be changed on the 'View Cart' page.
$ 5.00 S&H charge on all orders.  Added charges for out of country or expedited orders.

Medallion Holders - Universal Holder - Various Holders
 > Wooden Medallion Holders - Desktop and Wall Plaques < 

Instructions below.
Our own creation.
A truly Universal
Medallion Holder
- No Screws! -
Holds any thickness
recovery medallion.
( 1-5/16" diameter.)
Copyright © Lyle P. Parkins
09/01/2004 - 2012
All Rights Reserved.
Screw Top Cap
with Key Chain

Gold Plated Key Chain Medallion Holder

Gold Plated - # 55
or
 Nickel Plated - # 56

DO NOT OVER TIGHTEN
NO REFUNDS ON
STRIPPED THREADS
Screw Top Cap
with 24 inch Chain.
Gold Plated Necklace Medallion Holder

Gold Plated - # 57
or
Nickel Plated - # 58

DO NOT OVER TIGHTEN
NO REFUNDS ON
STRIPPED THREADS
 
Sorry - we're out.
Order in to have a few thousand
more made. Probably be
mid summer before they arrive.


Instructions below.

Gold Plated Key Chain
MH-55
$ 9.00 each
< Enter Quantity
Click >

Nickel Plated Key Chain
MH-56
$ 9.00 each
< Enter Quantity
Click >

Gold Plated Necklace
with 24 inch chain.
MH-57
$ 9.00 each
< Enter Quantity
Click >

Nickel Plated Necklace
MH-58
$ 9.00 each
< Enter Quantity
Click >

Instructions for
Universal Medallion Holder
ABOVE
Push medallion into the bottom
of the holder while holding the
medallion in the desired position.
Hold and adjust medallion position
as it enters.
It takes considerable hand strength
to adjust the medallion once it's
inserted. It also takes considerable
hand strength to remove medallion
once it's installed.

Fits ALL 33mm or 1-5/16"
Recovery Medallions
Notes on medallions
appropriate for holders
at right.  >>>
These are specifically made
for the > Wendell's engraved
medallions.
They are thicker
than the average medallion
because of the routing out
of dates, etc. They also work
well for BSP Tri-Plates - with
little gradual squeezing with
pointed pliers at the top to
help pull the cap threads
together.
TRI-PLATE ACRYLIC COATINGS
VARY IN THICKNESS CONSIDERABLY
Gold Plate Thick Medallion Holder - Necklace>Side View Medallion Holder Rings
 ONLY for 
 THICK Medallions 
 such as acrylic coated 
 "Tri-plates" 
 See notes at left. 

Medallion Holder for THICK Medallions - Key Tag> Medallion Holder Side View Comparison
 ONLY for 
 THICK Medallions 
 such as acrylic coated 
 "Tri-plates" 

 See notes at left. 
More Below

Scroll Down
More Below

Scroll Down

( For thick medallions. )
Gold Plated Necklace
with 24 inch chain.
MH-51
 $ 10.00 each
< Enter Quantity
Click >

( For thick medallions. )
Gold Plated Keychain
4" end to end.
MH-52
 $ 10.00 each
< Enter Quantity
Click >

Color varies slightly.
Black and Brown Leather Tear Drop Medallion Holder Key Ring
Medallion Holders  66 - 65
Coin Visible - FRONT ONLY
Medallions Not Included
Color varies slightly.

Medallion Holder # 78-Black
# 68-Dk Brown
Coin Visible - FRONT ONLY
Medallion Not Included

Color varies slightly.
Black Leather Rivited w/ Side Snap Medallion Holder Key Ring
Medallion Holder # 74-Black
# 82-Dk Brown

Coin Visible - Both Sides
Medallion Not Included
Color varies slightly.

Medallion Holder # 69-Brown
Coin Visible - Both Sides
Medallion Not Included
Black Leather
Solid Back
MH-65  ( Tear Drop Design )
$ 8.00 each
Enter Qty. >
 
Dark Brown Leather
Solid Back
MH-66  ( Tear Drop Design )
$ 8.00 each
ON SUPPLIER BACK ORDER
FOR A LONG WHILE
Black Leather
Solid Back
MH-78  ( Stop Sign Design )
$ 8.00 each
Enter Qty. >
 
Dark Brown Leather
Solid Back
MH-68  ( Stop Sign Design )
$ 8.00 each
Enter Qty. >
 
Side snap for coin insertion.
Coin Visible on Both sides.
Riveted
Black Leather
MH-74  ( Side Snap Design )
$ 8.00 each
Enter Qty. > 
>
One of the top rivets is a blank.
Makes an opening for coin entry.
Coin Visible on Both sides.

Riveted
Dark Brown Leather
MH-69  ( Side open insert )
$ 8.00 each
Enter Qty. > 
>




Nice soft leather.
Medallion slips in side slot.
Side arm swings to hold medallion.
Clamshell clasp holds arm in.


Medallion will spin unless secured.
  WE SUGGEST THESE FOR 
  BRONZE MEDALLIONS ONLY 
Medallion Not Included
Color varies...
Shield Medallion Holders
Medallion Holder 75 & 76 ( Black )
Coin Visible - Both Sides
Medallion Not Included
Medallion slips in top slot.
Clamshell clasp holds it in.


Medallion will spin unless secured.
  WE SUGGEST THESE FOR 
  BRONZE MEDALLIONS ONLY 
 Will hold most any type recovery medallion, p;
 although make sure you open top enough 
 to not scar tri-plates when inserting. 
Medallion Not Included

Brown Leather
Fold Snap Case
MH-80
$ 12.00 each
Enter Qty. > 
>

MH 77
$ 6.00 each
Click >

Dark Brown Leather
( MUCH DARKER THAN PICTURED )
MH-75   $ 8.00 each
Enter Qty. > 
 >

BLACK Leather
MH-76   $ 8.00 each
Enter Qty. >
 

MH 84
$ 4.50 each
Click >

Brown Mahogany Medallion Holder Box >
Medallion Holder # 81
 < Brown Mahogany Medallion Holder Box
Medallion Holder # 81
Mahogany - Natural Finish
Velvet Box w/Jewel Case

Medallion Holder 80
Medallion NOT Included
More Below

Scroll Down
> > >
Approx. 1-3/4" x 2-3/4"
1 inch high.
(Similar to Dark Walnut Stain Finish )
Mahogany - Natural Finish with
Circle/Triangle logo on top.
Leather like lining - inscribed with
" One day at a time " inside.

Medallion Holder # 81
$ 20.00 each
Click  > 

Approx. 2-1/2" x 2-1/2"
1 inch high.
Black Velvet Outside
and Satin Lined
Comes with empty capsule
for medallion.

$ 12.00 each
Click >

More Below

Scroll Down
Medallion Jewel Case
Medallion Not Included
Medallion Holder Jewel Case
Protective capsules.
Stands for capsules.
Sold separately.
Some Tri-Plates are a bit too thick for these.
Contact us to confirm if you are unsure of fit.
It's a matter of thickness - not diameter.
Medallion Case  Medallion Stand
Protective Capsule
and Stand
Medallion Not Included
AA Anniversary Medallion in Protective Capsule with Stand
ORDER BOTH
Stand & Capsule
Example Medallion Stands and Cases 
Square Plastic Snap Case
Medallion Holder
2" x 2" x 3/8" with foam insert.

$  .75 cents each
Enter Qty. > 
>

Capsules ONLY - $ .85 ea.
Enter Qty. >  >

Stands ONLY - $ 1.25 ea.
Enter Qty. >  >

Capsule and Stand Set
$ 2.00 per set.
Enter Qty  >

How to remove the protective capsules.

Use a sharp knife & gently wedge it
into the edge where the front and
back meet. Wiggle the knife blade
little by little around the edge.
The capsule will open.

GENTLY AND CAREFULLY WORKS
DON'T INJURE YOURSELF USING FORCE
 

>  Wooden Medallion Holders - Desktop and Wall Plaques